4PCS DIY Model 1CH PWM Relay Module 5V-10V Receiver 1A Electronic On-off Switch Strobe Light Controller for RC Airplane Parts

Sale price $22.39 Regular price $23.99

Shipping calculated at checkout.
- Only 5V-10V voltage receiver is supported, otherwise the module may be damaged. If the receiver and the servo are using a high voltage system, the module should be added with a step-down module.
- 1 channel servo signal input, control 1 relay switches
- Parallel maximum 1A current
- One way LED indicates working status
- With boot protection, easy to operate
- Input channels do not need to be calibrated, compatible with various brands of remote control devices
- Adopt transparent heat-shrinkable rubber, stylish appearance, at a glance
- Small size and light weight

Application Range:
- Remote control model rocket launch
- Remote control model smoke control
- weapon system control like real machine
- Model aircraft's smoke control
- Control of various remote switch systems
-Switch the signals of two cameras
- Control the opening and closing of various electrical power sources, such as navigation lights, searchlights, strobe lights, buzzers, etc.
- Control the camera shutter or switch the camera's recording and camera mode.

Functional Description:
- The remote switch remotely controls the electrical equipment on the aircraft model through a switch channel on the remote control, and the 1-way LED dynamically demonstrates the current switch state in real time, so it can be quickly started without an operation manual.
- This device does not require calibration and can be accurately compatible with remote control devices of various brands.

Typical Application:
1. Connect
- Plug the signal input cable into an idle receiver channel that corresponds to a switch on the remote.
- The power indicator will be illuminated when connected to the receiver.
- The work indicator lights up when the switch channel is open and vice versa.

2. Working mode
- The red LED light indicates the power indicator.
- The blue LED indicates the relay's operating status.

3. Trigger
- Turn the switch on the remote control (OFF->ON), the green LED lights up and the relay starts to work..

Package include:
4pcs x relay switch