Remark: this is upgraded version
Specification:
- Item name: bidirectional brushed ESC
- Working voltage: 12V-24V ( 3S-6S )
- Size ( length x width x height ): 68.8x41.7x37mm
- Used for rc bait boat, for diy model car, for children kids rc car, rc robotic mower motor
- Peak Current ( forward/backward): 110A
- Rated Power: 1000W
- Remote control signal PWM: 800us-2200us
- Neutral point: 1500us
- Build in 28PCS MOS FET
- With cooling fan
- "H" bridge structure
- Motor Limit:
Drive ability at the same time at 12V: 3PCS 540, 3PCS 550, 2PCS 775, 2PCS 795, 1PCS 895 or 1PCS 997 Motors
Drive ability at the same time at 24V: 2PCS 775, 2PCS 795, 1PCS 895 or 1PCS 997 Motors
Description:
- Automatically to find the neutral point, No throttle rang calibration required.
- Build in 5V/3A UBEC, it can drive 2PCS 25kg servos.
- The ESC is not waterproofed
- Do not equip with power supply plug
Application:
- Widely use for RC boat, RC tug boat, RC fishing bait boat, RC cruise, RC marine, RC car, tank etc.
- Suitable for 540, 550, 775, 795, 895, 997 brush motor.
Three Working modes (Be set by switch):
Mode 0: Forward/ Backward Model.
Mode 1: Forward/Brake/Backward (neutral point brake)
Mode 2: Forward/Brake/Backward (Throttle stick move back brake)
- Mode 0: no brake
- Mode 1: The throttle stick move back to the neutral postion, the motor braked to a stop. When the motor is forward rotation, pull back the throttle, motor reverses immediately.
- Mode 2: The throttle stick move back across the neutral postion, the motor braked to a stop,At this time, if you want to reverse the motor, you must move the throttle stick to the neutral ponit first.
LED indicator:
LED on-- Working normally
LED flash-- The throttle stick is not at the neutral point
LED flash fast-- Signal lost
How to use:
- Connect with receiver,motor,battery correctly.
- Turn on the power of ECS, If the transmitter is off, LED will flash fast.
- Push the throttle stick to the neutral point, turn on the transmitter, and adjust the throttle trim until the LED on, that means the neutral position has been confirmed.
Note:
- UBEC is a switching-Mode regulators, please don't use two ESC in parallel to power the receiver, otherwise they will be burned.
- Size is manual measurement, so there are exist errors
Package included:
1pcs x ESC