Specification:
- Item name: propeller puller/removal tool
- Color: gray
- Material: PETG
- Process: 3D printing
- Size: 77.8x49.7mm/3.06x1.96inch
- Diameter of the metal pin: 0.85mm, it can be applied to motor shafts with diameters of 1mm and 1.5mm
- Suitable for 1S 2S small aircraft, such as BetaFPV Air65 Air75
- Used for tiny whoops FPV drone
Features:
1. An iron block is embedded inside, which solves the problem of the thimble sinking inward.
2. Three screws are used to fix the metal prying piece, making it stable and not easy to shake.
3. It adopts a certain ergonomic design, reducing the pressure on the hands and making it easier to operate.
Instructions:
(Note: When removing the propeller, be sure not to poke the coils of the motor.)
- When removing the propeller, please confirm that the V-shaped groove at the head of the prying piece is perpendicular to the thimble. When removing the propeller, you need to hold the aircraft with your hand.
- In view of the fact that different propeller blades have slight differences in shape, and some people insert the propeller blades all the way to the bottom when installing them, while others leave a gap. Therefore, it is recommended that after getting the propeller puller, you use pliers to slightly adjust the position of the metal prying pieces to meet your own usage habits. Otherwise, the thimble is likely to fail to align with the motor shaft.
- Under normal circumstances, the propeller blades can be easily removed.
- For the same aircraft, due to the different installation depths of the motors, the propeller puller fails to align with the motor shaft. Therefore, it is generally not recommended to install the propeller blades all the way to the very bottom without leaving any gap.
In response to this situation, we can insert the propeller puller and gently snap it twice to create a gap. Then, the propeller can be easily removed.
- For relatively small propeller blades, there may also be a situation where they fail to align with the shaft.
- If the propeller blades are relatively large, the prying pieces of the propeller puller cannot be inserted at all.
At this time, you need to use pliers to adjust the prying pieces. Bend it backward, and then press the top part downward. In this way, the pin will be positioned much more outward. It should be noted that the pin must be exactly in the middle of the V-shaped groove of this metal prying piece so that it can be stuck in the very middle position of the motor shaft.
- For small motors, this approach won't work, and you'll have to readjust it with pliers again. Adjust it in the opposite direction to make the angle of this "7" shape smaller.
Note:
- Size is manual measurement, there are exist errors.
- The FPV drone, propeller, motor and others in picture shown will not include.
- This product is completely handmade. It is not as perfect as those made by machines. It is a DIY product, so there may be some minor flaws. If you mind, please do not place an order.
Package include:
1pcs x propeller puller