Specification:
- Item name: rc drone control fiber optic cable
- Distance: 2KM/3KM/5KM (If you need 10KM/15KM/20KM, please contact us)
- Shell material: engineering plastic ABS
- Two types:
1. Light fiber: 0.3mm optical fiber diameter
2. Ultra fiber: 0.25mm optical fiber diameter
Description:
- Both end with connector
- Usually, the connector is FC/UPC, if any other issues PLS contact with our customer service
- The outgoing wire is smooth and the outgoing speed can reach 120km/h
- Adopting bending resistant G657A2 fiber core and adding fiber coating technology, it has better tensile and wear resistance
Specification for transmit module(Sky Terminal) (TX module):
- MCU: FPGA
- Input power: 9-18V
- Interface: UART & Video
- Video protocol: PAL / NTSC
- Control protocol: TTL / ELRS / SBUS
- Max distance: ＞25km
- Optical wavelength: 1310nm / 1550nm
- Size: 60x35mm
- Weight: about 10g
Wire connection for transmit module(Sky Terminal):
- VCC, connect with flight control PCB board 9-18V
- GND, connect with flight control GND (G) channel
- VIDEO, connect with flight control VTX channel
- RX, connect with flight control TX pin
- TX, connect with flight control RX pin
- FC (Optical Interface), connect the optical fiber behind the fiber optic storage box to the FC of the TX module
Specification for receiver module(Ground Terminal) (RX module):
- MCU: FPGA
- Input power: 4S-6S with XT60
- Interface: UART / Video (RCA and VTX)
- Video protocol: PAL / NTSC
- Control protocol: TTL / ELRS / TBS / CRSF
- Max distance: ＞25km
- Optical wavelength: 1310nm / 1550nm
- Size:72x32x30mm
- Weight: about 20g
Total 9 types for your refer:
- only receiver module (not including battery), wireless/wired remote control direct connection/2-channel AVI output
- Light 2KM w transmit module
- Light 3KM w transmit module
- Light 5KM w transmit module
- Light 2KM, about 0.5kg
- Light 3KM, about 0.55kg, box diameter 90mm, 230mm in height
- Light 5KM, about 0.75kg, box diameter 115mm, 290mm in height
- Ultra 5KM w transmit module, about 0.65kg
- Ultra 5KM, about 0.65kg, box diameter 90mm, 230mm in height
Note:
- During flight, ensure that the fiber optic outlet is kept away from the propeller.
- Avoid excessive angles when exiting the fiber optic cable, and avoid excessive angles when turning to prevent the fiber optic cable from being cut by the propeller.
- The flight speed needs to be controlled within 120km/h.
- Before flying, please ensure that the fiber optic box fixing buckle is unlocked.
- Please accelerate slowly when taking off to avoid accelerating too quickly throughout the entire flight, otherwise it may cause fiber overload.
- If any other issues PLS contact with our customer service.
- The weight and size marked on the label of the optical fiber box may vary due to different production batches.
- Size is manual measurement, there are exist errors.
- The remote controller, screen, FC and others in picture shown will not include.
Package included is optional:
1pcs x fiber optic cable
or
1pcs x receiver module
or
1pcs x fiber optic cable, with transmit module